III
Transverse finishing
278
2.
1.
Insert the finishing tool into the tool holder
Tap Tools on the status bar
The Tools dialog box appears
Tap Finishing tool
Tap Confirm
The associated tool parameters are applied by the product
automatically
The Tools dialog box is closed
Set a spindle speed of 2000 rpm
Position the tool:
X: Ø 14.0 mm
Z: 0.0 mm
Position the tool:
X: Ø -0.4 mm (1.)
Move the tool to a safe position (2.)
Information for the Operator user | Application example
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022