Overview; Figure 50: Programming Menu - HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual

III
4.1

Overview

This chapter describes the Programming operating mode and how to create new
programs and edit existing programs in this mode.
Short description
The product uses programs for recurring tasks. Programs are created through the
defining of various blocks, such as positioning functions or machine functions. A
sequence of multiple blocks then forms a program. You can save a maximum of 100
blocks within a program.
Calling up

Figure 50: Programming menu

1 View bar
2 Toolbar
3 Program management
254
Make sure that you have read and understood the "Basic operation"
chapter before carrying out the actions described below.
Further information: "Basic operation", Page 18
Programming does not require connecting the product to a machine tool.
To obtain a better overview during programming, you can use the
POSITIP 8000 Demo software for programming. You can export the
generated programs and load them onto the device.
Tap Programming in the main menu
The user interface for programming is displayed
1
3
The status bar and the optional OEM bar are not available in the
Programming menu.
Information for the Operator user | Programming
2
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022