Figure 41: Schematic Depiction Of The Thread Cutting (Basic) Block - HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual

Information for the Operator user | MDI mode
Thread cutting (basic) block

Figure 41: Schematic depiction of the Thread cutting (basic) block

Parameter
Thread position
Direction of rotation
Safety clearance
Thread depth (diame-
ter)
Thread pitch
Contour start in Z
Contour end in Z
Overrun
Starting angle
Rotational speed
Feed rate in X
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
Z
X
Z
X
Description
Position of the thread
External thread
Internal thread
Direction of rotation of the rotational axis
Right
Left
Incremental to the thread depth, radial dimension
Thread depth, diameter dimension
Pitch of the thread
In mm
In threads per inch
Start of the thread in Z
End of the thread in Z
Path at the end of thread for stopping the axes
Entrance angle in the rotational axis
Rotational speed in rpm
Feed rate for downfeed to thread depth
III
237