HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 48

I
3.10.6 Entering and activating the jog increment
Entering and activating the jog increment
In Manual operation mode, you can enter and activate a jog increment via the Feed
rate/Jog increment dialog.
Dialog
3.10.7 Additional functions in Manual operation mode
The following operating elements are available:
Operating element
3.11 OEM bar
Depending on the configuration, the optional OEM bar enables you to control the
functions of the connected machine tool.
48
Function
Tap Feed rate /Jog increment on the status bar
Activate the jog increment with the ON/OFF slide switch
For linear axes, use the input fields for mm/rev and mm/
min
For rotational axes, use the jog increment ° input field
To call the additional functions, tap Additional functions in the
status bar
Function
Reference marks
For starting the reference mark search
Further information: "Activating the reference mark
search", Page 139
Presets
Setting presets
Further information: "Touching off presets", Page 169
Tool data
For tool setting (touch-off)
Further information: "Calibrating a tool", Page 167
The status bar and the optional OEM bar are not available in the
Programming menu.
General information | Basic operation
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022