HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 168

II
Deleting a tool
Creating a preset table
You can access the preset table on the status bar. The preset table contains the
absolute positions of the presets with respect to the reference mark. You can save a
maximum of 99 presets in the preset table.
1 Designation
2 Coordinates
3 Edit the preset table
168
Tap Tools on the status bar
The Tools dialog box appears
Tap Open table
The Tool table dialog box appears
To select one or more tools, tap the checkbox in the relevant
row
The active checkbox is highlighted in green
The entry for a tool can be locked to prevent accidental
changes or deletion.
Tap the Unlock symbol next to the entry
The symbol changes and the entry is unlocked
Tap Delete
A message appears
Close the message with OK
The selected tool is deleted from the tool table
Tap Close
The Tool table dialog box is closed
1
3
Information for OEM and Setup users | Setup
2
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022