HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 158

II
5.3 Single steps for setup
Prerequisite: You are logged on as a user of the Setup type (see "Logging in for
setup", Page 155).
Basic settings
Setting the date and time
Setting the units of measure
Entering and configuring users
Adding the Operating Instructions
Configuring the network
Configuring the network drive
Configuring operation with a mouse or touchscreen
Preparing machining processes
Creating a tool table
Creating a preset table
Backing up data
Back up settings
Back up user files
Loss of or damage to configuration data!
If the product is disconnected from the power source while it is on, the
configuration data can be lost or corrupted.
Back up the configuration data and keep the backup for recovery purposes
5.3.1 Basic settings
158
The following setup steps build on each other.
To correctly set up the product, make sure to perform the steps in the
order described here
The commissioning engineer (OEM) may have already carried out several
basic settings.
Information for OEM and Setup users | Setup
NOTICE
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022