III
Depiction as contour view
The simulation window displays a contour view. The contour view aids in the precise
positioning of the tool or with contour tracking in the machining plane.
The contour view uses the following colors (defaults):
Figure 49: Simulation window with contour view
1 Machining pattern (white)
2 Current block or machining position (green)
3 Tool contour, tool position and tool track (orange)
250
You can modify the colors and line thicknesses used in the contour view.
Further information: "Simulation window", Page 184
Information for the Operator user | Program run
2
1
3
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022