HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 181

Information for OEM and Setup users | Settings
7.2
General
This chapter describes settings for configuring the operation and display .
Parameter
Device information
Screen
Display
Simulation window
Input devices
Sounds
Printers
Date and time
Units
Copyrights
Service info
Documentation
7.2.1
Device information
Settings ► General ► Device information
The overview displays basic information about the software.
Parameter
Product designation
Part number
Serial number
Firmware version
Firmware built on
Last firmware update on
Free memory space
Free working memory (RAM)
Number of unit starts
Operating time
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
Further information
"Device information", Page 181
"Screen", Page 182
"Display", Page 183
"Simulation window", Page 184
"Configuring operation with a mouse or touchscreen",
Page 165
"Sounds", Page 185
"Printers", Page 185
"Setting the date and time", Page 88
"Setting the units of measure", Page 88
"Copyrights", Page 185
"Service info", Page 186
"Documentation", Page 186
Displays the information
Product designation of the product
ID number of the unit
Serial number of the product
Version number of the firmware
Firmware creation date
Date of most recent firmware update
Free memory space in the internal storage location Internal
Free RAM on the system
Number of times the product was started up with the current
firmware
Operating time of the product with the current firmware
II
181