Measuring The Reference Tool - HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual

Information for the Operator user | Application example
5.4.1

Measuring the reference tool

For every tool used, determine the position of the cutting edges (for X and/or Z) in
relation to the machine coordinate system or to the workpiece preset. To do so, first
define a tool based on which all further parameters of the other tools are calculated.
In this example, the finishing tool will be used as the reference tool.
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
Insert the finishing tool into the tool holder
Tap Tools on the status bar
The Tools dialog appears
Tap Finishing tool
Tap Confirm
The finishing tool is shown in the status bar
Set a spindle speed of 1500 rpm
Tap Auxiliary functions in the status bar
Tap Tool data
The Set tool data dialog box opens
Approach the workpiece blank with the finishing tool and
perform a touch-off
When the appropriate Z value is reached, tap Save position
Perform face turning with the finishing tool
Move the tool to a safe position
In the Z input field, enter the value 0
Approach the workpiece blank with the finishing tool
When the appropriate X value is reached, tap Save position
Turn a step on the outside diameter of the workpiece blank
using the finishing tool
Move the tool to a safe position
Spindle OFF
Measure the turned outside diameter using an appropriate
measuring tool
Enter the measured value in the X input field
Tap Confirm in the wizard
The Select the tool dialog appears
Tap Finishing tool
Tap Confirm in the wizard
The parameters are added to the tool table
III
271