HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 96

II
Ascertaining the line count per revolution
For angle encoders with interfaces of the type 1 V
sequence to ascertain the exact line count per revolution.
Settings ► Axes ► <Axis name> ► Encoder
Reference marks (Encoder)
Settings ► Axes ► <Axis name> ► Encoder ► Reference marks
Parameters
Reference mark
Maximum traverse path
Nominal increment
96
From the Encoder model drop-down list, select Angle
encoder
For Display mode select the - ∞ ... ∞ option
Tap Reference marks
Select one of the following options from the Reference mark
drop-down list:
None: There is no reference mark
One: The encoder has one reference mark
In order to switch to the previous axis, tap Back
To start the teach sequence, tap Start
The teach sequence is started and the wizard is displayed
Follow the instructions of the wizard
The line count determined during the teach sequence is
transferred to the Line count field
The ascertained line count remains stored if you select a different display
mode after the teach sequence.
For encoders with EnDat interface, the reference mark search is omitted
because the axes are referenced automatically.
Information for OEM and Setup users | Commissioning
or 11 μA you can use a teach
PP PP
Explanation
Definition of the type of reference mark
Settings:
None: There is no reference mark
One: The encoder has one reference mark
Coded: The encoder has distance-coded reference marks
Default value: One
For linear encoders with coded reference marks:
maximum traverse path for determining the absolute position
Setting range: 0.1 mm ... 10000.0 mm
Default value: 20.0
For angle encoders with coded reference marks:
maximum nominal increment for determining the absolute
position
Setting range: > 0° ... 360°
Default value: 10.0
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022