HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 200

II
Prerequisite
The new firmware is available as a *.dro file
To update the firmware over the USB port, the current firmware must be stored
on a USB mass storage device (FAT32 format)
To update the firmware via the network interface, the current firmware must be
available in a folder on the network drive
Starting a firmware update
Updating the firmware
The firmware can be updated from a USB mass storage device (FAT32 format) or
via a network drive.
200
Information for OEM and Setup users | Servicing and maintenance
Tap Settings in the main menu
Tap Service
Open in succession:
Firmware update
Continue
The service application is launched
Tap Firmware update
Tap Select
If required, connect a USB mass storage device to a USB port
of the product
Navigate to the folder containing the new firmware
If you have accidentally tapped the wrong folder, you
can return to the previous folder.
Tap the file name that is displayed above the list
Select the firmware
Tap Select to confirm the selection
The firmware version information is displayed
Tap OK to close the dialog
The firmware update cannot be canceled once the
data transfer has started.
Tap Start to start the update
The screen shows the progress of the update
Tap OK to confirm successful update
Tap Finish to terminate the service application
The service application is terminated
The main application is launched
If automatic user login is active, the user interface is displayed
in the Manual operation menu
If automatic user login is not active, the User login menu is
displayed
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022