HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 83

Information for OEM and Setup users | Commissioning
4.2.4 Changing the password
You must change the password to prevent unauthorized configuration.
The password is confidential and must not be disclosed to any other person.
4.3 Steps for commissioning
The following commissioning steps build on each other.
To correctly commission the product, make sure to perform the steps
in the order described here
Prerequisite: You are logged on as a user of the OEM type (see "Logging in for
commissioning", Page 81).
Selecting the application
Selecting the Application
Basic settings
Activating Software options
Setting the date and time
Setting the units of measure
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
Tap Settings in the main menu
Tap User
The logged-in user is indicated by a check mark
Select the logged-in user
Tap Password
Enter the current password
Confirm entry with RET
Enter the new password and repeat it
Confirm entry with RET
Tap OK
Close the message with OK
The new password is available the next time the user logs in
II
83