HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 155

Information for OEM and Setup users | Setup
5.1 Overview
This chapter contains all the information necessary for setting up the product.
During setup, the setup engineer (Setup) configures the product for use on the
machine tool in the respective applications. This includes, for example, setting up
operators and creating preset tables and tool tables.
Make sure that you have read and understood the "Basic operation"
chapter before carrying out the actions described below.
Further information: "Basic operation", Page 18
The following steps must be performed only by qualified personnel.
Further information: "Personnel qualification", Page 15
5.2 Logging in for setup
5.2.1 User login
To set up the product, the Setup user must log in.
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
Tap User login in the main menu
If required, log out the user who is currently logged in
Select the Setup user
Tap the Password input field
Enter the password "setup"
If the password does not match the default password,
ask a Setup user or OEM user for the assigned
password.
If the password is no longer known, contact a
HEIDENHAIN service agency.
Confirm the entry with RET
Tap Log in
II
155