Applying The Scaling Factor; Setting The Spindle Speed - HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual

Information for the Operator user | Program run
Activating the simulation window
Modifying the contour view
3.2.5

Applying the Scaling factor

If a scaling factor is activated for one or more axes, this scaling factor is multiplied
by the stored nominal position during execution of a block. This enables you to
mirror and scale a block.
You can activate a scaling factor in the quick access menu.
Further information: "Adjusting settings in the quick access menu", Page 45
If the calculated dimensions cannot be attained with the selected tool,
the execution of the block is aborted.
The scaling factor cannot be changed during execution of a block.
3.2.6

Setting the spindle speed

You can control the spindle speed depending on the configuration of the connected
machine tool.
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
Tap Graphic-Position
The simulation window for the currently selected block
appears
Tap Graphic on the view bar to enlarge the simulation window
The parameter view is hidden and the simulation window is
enlarged
Tap Detail view
The detail view shows the tool path and the possible
machining positions for the currently selected block
Tap Overview
The overview shows the entire workpiece
To switch from the display of the spindle speed to the input
field (if required), drag the display to the right.
The Spindle speed input field is displayed
Tap or long-press + or – to set the spindle speed to the desired
value
or
Tap the Spindle speed input field
Enter the desired value
Confirm entry with RET
The product applies the entered spindle speed as the nominal
value and controls the spindle of the machine tool accordingly
To return to the display of the actual spindle speed, drag the
input field to the left
III
251