HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 138

II
4.6.14
Reference marks
Settings ► Axes ► General settings ► Reference marks
Parameters
Reference mark search after
unit start
All users can cancel reference
mark search
Reference mark search
Reference mark search status
Stop of reference mark search
138
Information for OEM and Setup users | Commissioning
Explanation
Setting for the reference mark search after unit start
Settings:
ON: The reference mark search must be performed after
startup
OFF: No prompt for a mandatory reference mark search is
displayed after startup of the product
Default value: ON
Specifies whether the reference mark search can be canceled by
all user types
Settings
ON: The reference mark search can be canceled by users of
any type
OFF: The reference mark search can only be canceled by users
of the OEM or Setup type
Default value: OFF
Start starts the reference mark search and opens the workspace
Indicates whether the reference mark search was successful
Display:
Successful
Unsuccessful
Indicates whether the reference mark search was canceled
Display:
Yes
No
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022