Turning The Recess - HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual

III
5.6

Turning the recess

In the third machining step, you will turn the recess that serves as undercut.
2.
1.
276
4.
5.
3.
Insert the recessing tool into the tool holder
Tap Tools on the status bar
The Tools dialog box appears
Tap Recessing tool 3 mm
Tap Confirm
The associated tool parameters are applied automatically
The Tools dialog box is closed
Set a spindle speed of 400 rpm
Position the tool:
X: Ø 13.0 mm
Z: -40.0 mm
Position the tool:
X: Ø 7.0 mm (1.)
Position the tool:
X: Ø 13.0 mm (2.)
Position the tool:
Z: -38.0 mm (3.)
Position the tool:
X: Ø 7.0 mm (4.)
Position the tool:
X: Ø 13.0 mm (5.)
Move the tool to a safe position
Switch off the spindle
You have successfully machined the recess
Information for the Operator user | Application example
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022