HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 206

II
8.7.2
Restore user files
Backed-up user files of the product can be loaded into the product again. Existing
user files will be overwritten. This, together with the restoring of the settings, enables
you to restore the complete configuration of a unit.
If servicing becomes necessary, a replacement unit can be operated with the
configuration of the failed unit after restoring. This requires that the version of the
old firmware matches that of the new firmware or that the versions are compatible.
Settings ► Service ► Back up and restore
Parameter
Restore user files
Safely removing a USB mass storage device
206
All files from all user groups that are stored in the respective folders are
backed up and can be restored as user files.
The files in the System folder are not restored.
Restore user files
Tap Load as ZIP
If required, connect a USB mass storage device (FAT32
format) to a USB port of the product
Navigate to the folder containing the backup file
Select the backup file
Tap Select
Confirm the successful transfer with OK
There is no automatic restart when the user files are
restored. A restart is performed when the settings are
restored.
"Restore settings"
To restart the product with the transferred user files, switch
the product off and then back on
Tap File management in the main menu
Navigate to the list of storage locations
Tap Safely remove
The message "The storage medium can be removed now."
appears
Disconnect the USB mass storage device
Information for OEM and Setup users | Servicing and maintenance
Explanation
Restoring of user files of the product
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022