HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 71

Information for OEM and Setup users | Installation
Damage to the product due to incorrect wiring!
The incorrect wiring of inputs or outputs can cause damage to the product or to
peripheral devices.
Comply with the pin layouts and specifications of the product
Assign only pins or wires that will be used
Further information: "Specifications", Page 211
3.3 Device overview
The connections on the rear panel of the device are protected by dust protection
caps from contamination and damage.
Contamination or damage may result if the dust protection caps are missing!
If no dust protection caps are fitted to unused connections, this may impair the
proper functioning of the contacts or destroy them.
Remove dust protection caps only when connecting measuring devices or
peripherals
If you remove a measuring device or peripheral, re-attach the dust protection
cap to the connection
The type of connections for encoders may vary depending on the product
version.
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
NOTICE
NOTICE
II
71