HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 161

Information for OEM and Setup users | Setup
Creating a user and password
You can create new Operator users. You can use any characters for the user ID and
the password. These entries are case-sensitive.
Prerequisite: An OEM or Setup user is logged in.
It is not possible to create new OEM or Setup-type users.
Settings ► User ► +
Parameter
User ID
Name
Password
Repeat password
Show password
Configuring and deleting a user
Settings ► User ► User name
Parameter
Name
First name
Department
Group
Password
Language
Auto login
Remove user account
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
Explanation
Adds a new user of the Operator type
It is not possible to add further OEM and Setup users.
The User ID is displayed for user selection, e.g., at the login
prompt. The User ID cannot be changed once it has been defined.
Name of the user
Entering a password for login
Repeating the password
You can show the contents of the password fields in plain text and
hide them again.
Explanation
Name of the user
First name of the user
Department of the user
Stating the group to which the user belongs
The password can be changed.
Selecting the language to be displayed for the user
Selecting whether the user is to be logged on automatically
without entering a password.
The user must have been logged on before the device is switched
off.
If automatic user login is active for one or more users,
the last user who logged in is automatically logged in
when the product is switched on. Neither the user ID
nor the password needs to be entered.
The user can be removed by an OEM user or Setup user.
OEM and Setup-type users cannot be deleted.
II
161