HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 169

Information for OEM and Setup users | Setup
Defining presets
You can define the preset table in the following ways:
Designation
Touch-off
Numerical
input
Depending on the application, users of the type Operator define the
presets.
Touching off presets
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
Description
Probing a workpiece using a tool. You must define the respective
tool position manually as a preset
You must manually enter the numeric value of the preset into the
preset table
Tap Manual operation in the main menu
The user interface for Manual mode is displayed
Tap Auxiliary functions in the status bar
Tap Presets in the dialog box
The Set preset data dialog box opens
Move the tool to the desired position
Tap Save position
The current position of the tool is saved
Retract the tool to a safe position
Enter the desired position data in the input fields
Tap Confirm in the wizard
The dialog Select preset opens
Select the desired preset in the Selected preset input field:
To overwrite an existing preset, select an entry from the
preset table
To create a new preset, enter a number that has not yet
been assigned in the preset table and confirm with RET
Tap Confirm in the wizard
The probed coordinates are adopted as a preset
II
169