Information for the Operator user | MDI mode
2.5.1
Depiction as contour view
The simulation window displays a contour view. The contour view aids in the precise
positioning of the tool or with contour tracking in the machining plane.
The contour view uses the following colors (defaults):
Figure 44: Simulation window with contour view
1 Machining pattern (white)
2 Current block or machining position (green)
3 Tool contour, tool position and tool track (orange)
Activating the simulation window
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
3
Tap Graphic-Position
The simulation window for the currently selected block
appears
Tap Graphic on the view bar to enlarge the simulation window
The parameter view is hidden and the simulation window is
enlarged
2
1
III
241