Figure 46: Example - Mdi Block; Figure 47: Example - Execution Of An Mdi Block With Scaling Factor - HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual

Information for the Operator user | MDI mode
Example:
The following MDI block is programmed:
Figure 46: Example – MDI block
A Scaling factor of –0.5 is activated for the X axis. The following MDI block will
therefore be executed:
Figure 47: Example – Execution of an MDI block with scaling factor
If the calculated dimensions cannot be attained with the selected tool,
the execution of the block is aborted.
The scaling factor cannot be changed during execution of a block.
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
III
243