Thread Cutting - HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual

III
5.9.2

Thread cutting

282
Insert the thread turning insert P = 1.5 mm in the tool holder
Tap the NC START key
Set a spindle speed of 500 rpm
Follow the instructions in the wizard
After the first cut, measure over 10 turns and check the
distances (15 mm)
Follow the instructions in the wizard
Tap Close
Program run is terminated
The wizard closes
Check the thread, for example with a counterpart or a thread
ring gage
You have successfully machined the thread
Information for the Operator user | Application example
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022