HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 180

II
7.1 Overview
This chapter describes the setting options and the associated settings parameters
for the product.
The basic setting options and settings parameters for commissioning and product
setup are outlined in the respective chapters:
Further information: "Commissioning", Page 80
Further information: "Setup", Page 154
Short description
Function
General
Interfaces
User
Axes
Service
Calling up
180
Depending on the type of user that is logged in to the product, settings
and settings parameters can be edited and changed (edit permission).
If a user logged in to the product has no edit permission for a setting or
a settings parameter, the setting or settings parameter is grayed out and
cannot be opened or edited.
Depending on the software options that have been activated on the
product, various settings and settings parameters are available in the
Settings menu.
If, for example, the POSITIP 8000 NC1 software option is not activated
on the unit, then the settings parameters that are necessary for this
software option are not displayed on the unit.
Description
General settings and information
Configuration of interfaces and network drives
Configuration of users
Configuration of connected encoders and error compensation
Configuration of software options, service functions and
information
Tap Settings in the main menu
Information for OEM and Setup users | Settings
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022