HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 160

II
Parameter
Rounding method for angular
values
Decimal places for angular
values
Decimal separator
Entering and configuring users
The following user types, which have different rights, are defined in the product's
factory default settings:
OEM
Setup
Operator
160
Information for OEM and Setup users | Setup
Explanation
Rounding method for decimal angular values
Settings:
Commercial: Decimal places from 1 to 4 are rounded down,
decimal places from 5 to 9 are rounded up
Round off: Decimal places from 1 to 9 are rounded down
Round up: Decimal places from 1 to 9 are rounded up
Truncate: Decimal places are truncated without rounding up or
down
Round to 0 and 5: Decimal places ≤ 24 or ≥ 75 are rounded to
0, decimal places ≥ 25 or ≤ 74 are rounded to 5
Default setting: Commercial
Number of decimal places for angular values
Setting range:
Radian: 0 ... 7
Decimal degrees: 0 ... 5
Deg-Min-Sec: 0 ... 2
Default value:
Radian: 5
Decimal degrees: 3
Deg-Min-Sec: 0
Separator for the display of values
Settings: Point or Comma
Default setting: Point
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022