HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 9

General information | Fundamentals
1.4 Demo software for the product
POSITIP 8000 Demo is software you can install on a computer regardless of the
device. POSITIP 8000 Demo helps you to become familiar with, try out or present the
functions of the device.
You can download the current version of the software here: www.heidenhain.de
To download the installation file from the HEIDENHAIN Portal, you
need access rights to the Software portal folder in the directory of the
appropriate product.
If you do not have access rights to the Portal's Software folder, you can
request the access rights from your HEIDENHAIN contact person.
1.5 Documentation on the product
1.5.1 Validity of the documentation
Before using the documentation and the product, you need to verify that the
documentation matches the product.
Compare the ID number and the index indicated in the documentation with the
corresponding data given on the ID label of the product
Compare the firmware version given in the documentation with the firmware
version of the product
Further information: "Device information", Page 181
If the ID numbers and indexes as well as the firmware versions match, the
documentation is valid
If the ID numbers and indexes do not match so that the
documentation is not valid, you will find the current documentation at
www.heidenhain.com.
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
I
9