HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 26

I
3.6 Setting the language
The user interface language is English. You can change to another language,
if desired.
3.7 Performing the reference mark search after startup
If the reference mark search is active on the unit, then a wizard will ask you to
traverse the reference marks of the axes.
After logging in, follow the instructions of the wizard
The Reference symbol stops blinking upon successful completion of the
reference mark search
Further information: "Operating elements of the position display", Page 39
Further information: "Activating the reference mark search", Page 139
3.8 User interface
26
Tap Settings in the main menu
Tap User
The logged-in user is indicated by a check mark
Select the logged-in user
The language selected for the user is indicated by a national
flag in the Language drop-down list
Select the flag for the desired language from the Language
drop-down list
The user interface is displayed in the selected language
If the product is configured with a spindle axis S, then you must define
an upper limit for the spindle speed prior to a possible machining
operation.
Further information: "Defining the upper limit for the spindle speed",
Page 225
If the reference mark search after unit start is active, then all of the unit's
functions will be disabled until the reference mark search has been
successfully completed.
Further information: "Reference marks (Encoder)", Page 96
For encoders with EnDat interface, the reference mark search is omitted
because the axes are referenced automatically.
The unit is available in different versions, which are variously equipped.
The user interface and available functions may vary depending on the
version.
General information | Basic operation
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022