HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 144

II
Configuring M functions
On the OEM bar, you can define menu items that control the use of M functions
depending on the configuration of the machine tool.
Settings ► Service ► OEM area ► OEM bar ► Bar items ► M function
Parameter
Description
Type
Number of the M function
Pulse time
Restart
Select image for active function
Select image for inactive
function
Upload image file
Remove bar entry
144
The manufacturer-specific M functions M100 to M120 are only available
if the connected output has been previously configured.
Information for OEM and Setup users | Commissioning
Explanation
Description of the bar item on the OEM bar
M function
Selecting the desired M function
Setting ranges
100.T ...120.T (TOGGLE: Switches between the states when
tapped on the OEM bar)
100.P ... 120.P (PULSE: The length can be set in Pulse time)
Default value: Empty
Selecting the length of the high-active pulse
Setting range
8 ms ... 1500 ms
Default value: 500 ms
Restarting the pulse duration
Settings: ON or OFF
Default value: OFF
Selecting the desired image for depicting the active function
Selecting the desired image for depicting the inactive function
Copies a selected image file to the storage location /Oem/Images
File format: PNG, JPG, PPM, BMP, or SVG
Image size: Max. 100 x 70 px
Removing the bar item from the OEM bar
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022