HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 205

Information for OEM and Setup users | Servicing and maintenance
8.7.1 Restore OEM-specific folders and files
Backed-up OEM-specific folders and files of the product can be loaded onto a
device. This allows you to restore the configuration of a device while restoring the
settings.
Further information: "Restore settings", Page 207
If servicing becomes necessary, an exchange unit can thus be operated with the
configuration of the failed unit once the settings have been restored, provided that
both units use the same or compatible firmware versions.
Settings ► Service ► OEM area ► Back up and restore
Parameter
Restore OEM specific folders and
files
Safely removing a USB mass storage device
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
Explanation
Restoring the settings of the OEM area as a ZIP file
Restore OEM specific folders and files
Tap Load as ZIP
If required, connect a USB mass storage device (FAT32
format) to a USB port of the product
Navigate to the folder containing the backup file
Select the backup file
Tap Select
Confirm the successful transfer with OK
There is no automatic restart when the OEM-specific
folders and files are restored. A restart is performed
when the settings are restored.
Further information: "Restore settings", Page 207
To restart the product with the transferred OEM-specific
folders and files, switch the product off and then back on
Tap File management in the main menu
Navigate to the list of storage locations
Tap Safely remove
The message "The storage medium can be removed now."
appears
Disconnect the USB mass storage device
II
205