HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 78

II
Pin layout of X106
1
Aout 0+ Aout 1+ Aout 2+ Aout 3+
9
Aout 0– Aout 1– Aout 2– Aout 3–
Analog inputs:
3.6 Connecting input devices
Comply with the pin layout
Remove and save the dust protection cap
Route the cables based on the mounting variant
Further information: "Assembly of the product", Page 64
Connect USB mouse or USB keyboard to USB Type-A port (X31, X32, X33, X34).
Make sure the USB cable connector is fully inserted
Further information: "Device overview", Page 71
Pin layout of X31, X32, X33, X34
4 3 2
DC 5 V
3.7 Connecting a network peripheral
Comply with the pin layout
Remove and save the dust protection cap
Route the cables depending on the mounting variant
Further information: "Assembly of the product", Page 64
Connect the network peripheral to Ethernet port X116 using a standard CAT.5
cable. The cable connector must firmly engage in the port
Further information: "Device overview", Page 71
78
2 3 4
10 11 12
1
1 2
Data (–)
Information for OEM and Setup users | Installation
5 6 7
GND GND Ain 1
13 14 15
DC 5 V Ain 0 Ain 2
Analog outputs:
3
Data (+)
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
8
Ain 3
4
GND