HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 165

Information for OEM and Setup users | Setup
Configuring operation with a mouse or touchscreen
The product can be operated either via the touchscreen or a connected (USB)
mouse. If the product is in its factory default setting, touching the touchscreen
deactivates the mouse. Alternatively, you can set that the product is operated either
only via the mouse or only via the touchscreen.
Prerequisite: A USB mouse is connected to the product.
Further information: "Connecting input devices", Page 78
You can modify the touch sensitivity of the touchscreen to allow operation under
special conditions (e.g. for operation with gloves).
Settings ► General ► Input devices
Parameter
Touchscreen sensitivity
Mouse substitute for multitouch
gestures
USB keyboard layout
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
Explanation
The sensitivity of the touchscreen can be adjusted in three levels
Low (contamination): Allows operating the touchscreen if it is
dirty
Normal (standard): Allows operating the touchscreen under
normal conditions
High (gloves): Allows operating the touchscreen while wearing
gloves
Default setting: Normal (standard)
Specifies whether mouse operation should replace operation
using the touchscreen (multitouch)
Settings:
Auto (until first multitouch): Touching the touchscreen
causes mouse deactivation
On (no multitouch): Operation only possible with the mouse,
the touchscreen is deactivated
Off (only multitouch): Operation only possible with the
touchscreen, the mouse is deactivated
Default setting: Auto (until first multitouch)
If a USB keyboard is connected:
Language selection of the keyboard assignment
II
165