HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 39

General information | Basic operation
3.8.10 Switch-off menu
Calling up
Short description
The Switch off menu provides the following options:
Operating element
Further information: "POSITIP 8000 – switch-on and switch-off", Page 23
Further information: "Cleaning the screen", Page 198
3.9 Position display
The unit's position display shows the axis positions and additional information about
the configured axes (if applicable).
You can also couple the display of axes and have access to the spindle functions.
3.9.1 Operating elements of the position display
Symbol
X
X
R
R
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
Tap Switch off in the main menu
The operating elements for shutting down the operating
system, for activating the energy-saving mode and for
activating the cleaning mode are displayed
Function
Shut down
Shuts down the operating system
Energy saving mode
Switches the screen off and puts the operating system into
energy-saving mode
Cleaning mode
Switches the screen off; the operating system continues
unchanged
Meaning
Axis key
Axis key functions:
Tapping the axis key: opens the input field for position
value (Manual operation) or dialog box MDI block (MDI
mode)
Holding down the axis key: sets the current position as
zero point
Dragging the axis key to the right: opens menu if
functions are available for the axis
Position display shows the diameter of the radial machining
axis X
Further information: "Display", Page 183
Reference mark search performed successfully
Reference mark search not performed or no reference mark
detected
I
39