HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 204

II
Errors and warnings
Settings ► Axes ► <Axis name> ► Encoder ► Diagnosis
Message
Encoder error
Encoder warning
The messages can have the following status:
Status
OK!
Not supported
Error!
8.7 Restoring files and settings
You can restore saved files and settings to a device.
The following sequence should be followed when restoring files and settings:
Restore OEM-specific folders and files
Restore user files
Restore settings
An automatic restart of the product is performed only after the settings have been
restored.
204
Information for OEM and Setup users | Servicing and maintenance
Description
Encoder errors indicate a malfunction of the encoder
Examples of encoder errors that may be displayed:
Failure of the light unit
Incorrect signal amplitude
Incorrect position
Overvoltage
Undervoltage supply
Overcurrent
Battery failure
Encoder warnings indicate that certain tolerance limits of
the encoder have been reached or exceeded
Examples of encoder warnings that may be displayed:
Frequency collision
Temperature exceedance
Light-source control reserve
Battery charge
Reference point
Evaluation
The encoder is within the specification
Message not supported by the encoder
Servicing/maintenance recommended; detailed
analyses recommended (e.g., with PWT 101)
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022