HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual page 49

General information | Basic operation
3.11.1 Operating elements of the OEM bar
The operating elements that are available on the OEM bar depend on the
configuration of the device and of the connected machine tool.
Further information: "Configuring the OEM bar", Page 142
The following operating elements are typically available in the OEM bar:
Operating element
3.11.2 Calling functions of the OEM bar
The operating elements that are available on the OEM bar depend on the
configuration of the device and of the connected machine tool.
Further information: "Configuring the OEM bar", Page 142
The operating elements in the OEM bar allow you to control special functions (e.g.,
spindle functions).
Further information: "Configuring special functions", Page 145
Setting spindle speed
Programming spindle speed
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022
Function
Logo
Displays the configured OEM logo
Spindle speed
Shows one or more default values for the spindle speed
Further information: "Configuring nominal values for the
spindle speed", Page 143
Tap the Spindle speed field on the OEM bar
The product applies the predefined voltage value at which
the spindle of the connected machine tool is brought to the
selected rotational speed (with no load on the spindle)
Tap or long-press + or – to bring the spindle to the desired
rotational speed
Press and hold the desired Spindle speed field on the OEM
bar
The background color of the field is highlighted in green
The product applies the current spindle speed as the nominal
value and displays it in the Spindle speed field
I
49