Using The Program - HEIDENHAIN POSITIP 8000 Series Operating Instructions Manual

III
Calling up
1 View bar
2 Status bar
3 Program control
4 Spindle speed (machine tool)
5 Program management
3.2

Using the program

The product displays a loaded program with the blocks and, when applicable, with
the individual working steps of the blocks.
246
Tap Program run in the main menu
The user interface for Program Run is displayed
1
5 4
If the Z axis and the Zo axis have been coupled, the Program run
operating mode is disabled.
If enabling signals are missing, the running program is halted and the
drives of the machine are stopped.
Further information: Manufacturer's documentation for the machine
Information for the Operator user | Program run
2
3
HEIDENHAIN | POSITIP 8000 | Operating Instructions Turning | 03/2022