Figure 48: Simulation Window With Contour View - HEIDENHAIN ND 7000 Operating Instructions Manual

MDI mode | Using the simulation window
11.4.1 Depiction as contour view
The simulation window displays a contour view. The contour view aids in the
precise positioning of the tool or with contour tracking in the machining plane.
The contour view uses the following colors (defaults):

Figure 48: Simulation window with contour view

1 Machining pattern (white)
2 Current block or machining position (green)
3 Tool contour, tool position and tool path (orange)
Activating the simulation window
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Tap Graphic
The simulation window for the currently selected block
appears
1 2
3
11
199