Figure 52: Example Of A Program In The Program Un Operating Mode - HEIDENHAIN ND 7000 Operating Instructions Manual

Program run (software option) | Using the program
12.2 Using the program
The product displays a loaded program with the blocks and, when applicable, with
the individual working steps of the blocks.
If enabling signals are missing, the running program is halted and the
drives of the machine are stopped.
Further information:
Requirement:
The appropriate workpiece and tool have been clamped
A program *.i file type has been loaded
Further information:

Figure 52: Example of a program in the Program un operating mode

1 View bar
Distance-to-go display
2
Program blocks
3
4 Program control
5 Spindle speed (machine tool)
6 Program management
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Manufacturer's documentation for the machine
"Managing programs", Page 210
1
2
6 5
3
4
12
205