Figure 49: Distance To Go With Position View With Graphical Positioning Aid - HEIDENHAIN ND 7000 Operating Instructions Manual

11
11.5 Working with the positioning aid
During positioning to the next nominal position, the product assists you by
displaying a graphic positioning aid ("traversing to zero"). A scale is shown
underneath each axis you traverse to zero. The graphic positioning aid is a small
square that symbolizes the target position of the tool.
Figure 49: Distance to go with position view with
graphical positioning aid
Actual value
1
2 Distance-to-go
3 Positioning aid
The positioning aid moves across the measuring scale when the tool center is
located within a range of ± 5 mm of the nominal position. The color also changes in
the following way:
Display of positioning aid
Red
Green
11.6 Applying the Scaling factor
If a scaling factor is activated for one or more axes, this scaling factor is multiplied
by the stored nominal position during execution of a block. This enables you to
mirror and scale a block.
You can activate a scaling factor in the quick access menu.
Further information:
200
1
2
3
Meaning
The tool center is moving away from the
nominal positions
The tool center is moving toward the nominal
position
"Adjusting settings in the quick access menu", Page 83
MDI mode | Working with the positioning aid
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020