Dir - Enterasys SecureStack C2 C2G170-24 Configuration Manual

dir

Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to save the running configuration:
C2(su)->save config
dir
Use this command to list configuration and image files stored in the file system.
Syntax
dir [filename]
Parameters
filename
Defaults
If filename is not specified, all files in the system will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to list all the configuration and image files in the system. The display
indicates which image file is the Active file and which image file is the Boot file that will be used
the next time the system reboots.
C2(su)->dir
Images:
==================================================================
Filename:
Version:
Size:
Date:
CheckSum:
Compatibility: <platform specific>
Filename:
Version:
Size:
Date:
CheckSum:
Compatibility: <platform specific>
Files:
================================ ========
configs:
3-40 Basic Configuration
(Optional) Specifies the file name or directory to list.
c2-series_05.02.00.0029 (Active)
05.02.00.0029
9411584 (bytes)
Fri Aug 1 06:55:23 2008
6126a7aadfdf05150afb6eca51982302
c2-series_05.02.00.0030 (Boot)
05.02.00.0030
9411584 (bytes)
Fri Aug 8 08:44:04 2008
627938b785fa7fdb8eed74672af1edcc
Size