Configuration Tasks; Show Lldp - Enterasys SecureStack C2 C2G170-24 Configuration Manual

show lldp

For information about...
show lldp port status
show lldp port trap
show lldp port tx-tlv
show lldp port location-info
show lldp port local-info
show lldp port remote-info
set lldp tx-interval
set lldp hold-multiplier
set lldp trap-interval
set lldp med-fast-repeat
set lldp port status
set lldp port trap
set lldp port med-trap
set lldp port tx-tlv
clear lldp
clear lldp port status
clear lldp port trap
clear lldp port med-trap
clear lldp port tx-tlv

Configuration Tasks

The commands included in this implementation allow you to perform the following configuration
tasks:
Step
1.
2.
show lldp
Use this command to display LLDP configuration information.
6-14 Discovery Protocol Configuration
Task
Configure global system LLDP parameters
Enable/disable specific ports to:
• Transmit and process received LLDPDUs
• Send LLDP traps
• Send LLDP-MED traps
Refer to page...
Command(s)
set lldp tx-interval
set lldp hold-multiplier
set lldp trap-interval
set lldp med-fast-repeat
clear lldp
set/clear lldp port status
set/clear lldp port trap
set/clear lldp port med-trap
6-15
6-16
6-16
6-17
6-18
6-20
6-22
6-22
6-23
6-23
6-24
6-24
6-25
6-25
6-27
6-27
6-28
6-28
6-29