Show History; Set History - Enterasys SecureStack C2 C2G170-24 Configuration Manual

show history

Use this command to display the size (in lines) of the history buffer.
Syntax
show history
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display the size of the history buffer:
C2(su)->show history
History buffer size: 20

set history

Use this command to set the size of the history buffer.
Syntax
set history size [default]
Parameters
size
default
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the size of the command history buffer to 30 lines:
C2(su)->set history 30
Specifies the size of the history buffer in lines. Valid values are 1 to 100.
(Optional) Makes this setting persistent for all future sessions.
SecureStack C2 Configuration Guide 14-13
show history