Purpose; Configuring Spanning Tree Port Parameters; Set Spantree Portadmin - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Configuring Spanning Tree Port Parameters

Purpose

To display and set Spanning Tree port parameters.
Commands
For information about...

set spantree portadmin

clear spantree portadmin
show spantree portadmin
show spantree portpri
set spantree portpri
clear spantree portpri
show spantree adminpathcost
set spantree adminpathcost
clear spantree adminpathcost
show spantree adminedge
set spantree adminedge
clear spantree adminedge
set spantree portadmin
Use this command to disable or enable the Spanning Tree algorithm on one or more ports.
Syntax
set spantree portadmin port-string {disable | enable}
Parameters
port‐string
disable | enable
Defaults
None.
Mode
Switch command, read‐write.
Specifies the port(s) for which to enable or disable Spanning Tree. For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 7‐2.
Disables or enables Spanning Tree.
Configuring Spanning Tree Port Parameters
Refer to page...
9-33
9-34
9-34
9-35
9-35
9-36
9-37
9-37
9-38
9-38
9-38
9-39
SecureStack C2 Configuration Guide 9-33