Clear Logging Application; Mnemonic Values For Logging Applications - Enterasys SecureStack C2 C2G170-24 Configuration Manual

clear logging application

level level
Table 14-3
Mnemonic
CLIWEB
SNMP
STP
Driver
System
Stacking
UPN
Router
Defaults
If level is not specified, none will be applied.
Mode
Switch command, read‐write.
Example
This example shows how to set the severity level for SNMP to 4 so that error conditions will be
logged for that application.
C2(rw)->set logging application SNMP level 4
clear logging application
Use this command to reset the logging severity level for one or all applications to the default value
of 6 (notifications of significant conditions).
Syntax
clear logging application {mnemonic | all}
14-8 Logging and Network Management
(Optional) Specifies the severity level at which the server will log
messages for applications. Valid values and corresponding levels are:
1 — emergencies (system is unusable)
2 — alerts (immediate action required)
3 — critical conditions
4 — error conditions
5 — warning conditions
6 — notifications (significant conditions)
7 — informational messages
8 — debugging messages

Mnemonic Values for Logging Applications

Application
Command Line Interface and Webview management
Simple Network Management Protocol
Spanning Tree Protocol
Hardware drivers
Non-application items such as general chassis management
Stacking management (if applicable)
User Personalized Networking
Router