Enterasys SecureStack C2 C2G170-24 Configuration Manual page 519

Table 18-2 Router CLI Configuration Modes (Continued)
Use this mode... To...
Router Configuration Set IP protocol
Mode parameters.
Note: To jump to a lower configuration mode, type exit at the command prompt. To revert back to
switch CLI, type exit from Privileged EXEC router mode.
Enabling Router Configuration Modes
Access method...
Type router and the
protocol name (and, for
OSPF, the instance ID)
from Global or Interface
Configuration mode.
SecureStack C2 Configuration Guide 18-3
Resulting Prompt...
C2(su)->router(Config-router)#