Clear Linkflap - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Parameters
port‐string
Defaults
If port‐string is not specified, all ports disabled by a link flap violation will be made operational.
Mode
Switch mode, read‐write.
Example
This example shows how to make disabled port ge.1.4 operational.
C2(rw)->clear linkflap down

clear linkflap

Use this command to clear all link flap options and / or statistics on one or more ports.
Syntax
clear linkflap {all | stats [port-string] | parameter port-string {threshold |
interval | downtime | all}
Parameters
all | stats
parameter
threshold | interval |
downtime | all
port‐string
Defaults
If port‐string is not specified, settings and/or statistics will be cleared on all ports.
Mode
Switch mode, read‐write.
Example
This example shows how to clear all link flap options on port ge.1.4.
C2(rw)->clear linkflap all
(Optional) Specifies the ports to make operational.
ge.
1.4
Clears all options and statistics, or clears only statistics.
Clears link flap parameters.
Clears link flap threshold, interval, downtime or all parameters.
(Optional unless parameter is specified) Specifies the port(s) on which
to clear settings.
ge.
1.4
SecureStack C2 Configuration Guide 7-29
clear linkflap