Set Igmpsnooping Interfacemode; Set Igmpsnooping Groupmembershipinterval - Enterasys SecureStack C2 C2G170-24 Configuration Manual

set igmpsnooping interfacemode

Example
This example shows how to enable IGMP on the system:
C2(su)->set igmpsnooping adminmode enable
set igmpsnooping interfacemode
Use this command to enable or disable IGMP on one or all ports.
Syntax
set igmpsnooping interfacemode port-string {enable | disable}
Parameters
port‐string
enable | disable
Defaults
None.
Mode
Switch command, read‐write.
Usage
In order for IGMP snooping to be enabled on one or all ports, it must be globally enabled on the
device using the set igmpsnooping adminmode command as described in "set igmpsnooping
adminmode" on page 13‐3, and then enabled on a port(s) using this command.
Example
This example shows how to enable IGMP on port ge.1.10:
C2(su)->set igmpsnooping interfacemode ge.1.10 enable

set igmpsnooping groupmembershipinterval

Use this command to configure the IGMP group membership interval time for the system.
Syntax
set igmpsnooping groupmembershipinterval time
13-4 IGMP Configuration
Note: IGMP snooping cannot be controlled via WebView.
Specifies one or more ports on which to enable or disable IGMP.
Enables or disables IGMP.