Set Banner Motd; Clear Banner Motd - Enterasys SecureStack C2 C2G170-24 Configuration Manual

set banner motd

set banner motd
Use this command to set the banner message of the day displayed at session login.
Syntax
set banner motd message
Parameters
message
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to set the message of the day banner to read: "This system belongs to
XYZ Corporation. Use of this system is strictly limited to authorized personnel."
C2(rw)->set banner motd "\tThis system belongs to XYZ Corporation.\nUse of this
system is strictly limited to authorized personnel."

clear banner motd

Use this command to clear the banner message of the day displayed at session login to a blank
string.
Syntax
clear banner motd
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
3-24 Basic Configuration
Note: Banner message text must be enclosed in beginning and ending double quotation marks.
The message itself cannot contain any additional double quotation marks.
Specifies a message of the day. This is a text string that needs to be in
double quotes if any spaces are used. Use a \n for a new line and \t for a
tab (eight spaces).