Show Snmp Group - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Example
This example shows how to remove the SNMP user named "bill":
C2(su)->clear snmp user bill

show snmp group

Use this command to display an SNMP group configuration. An SNMP group is a collection of
SNMPv3 users who share the same access privileges.
Syntax
show snmp group [groupname groupname] [user user] [security-model {v1 | v2c | usm}]
[volatile | nonvolatile | read-only]
Parameters
groupname
groupname
user user
security‐model v1 |
v2c | usm
volatile |
nonvolatile | read‐
only
Defaults
If groupname is not specified, information about all SNMP groups will be displayed.
If user is not specified, information about all SNMP users will be displayed.
If security‐model is not specified, user information about all SNMP versions will be displayed.
If not specified, information for all storage types will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display SNMP group information:
C2(su)->show snmp group
--- SNMP group information ---
Security model
Security/user name
Group name
Storage type
Row status
Security model
Security/user name
Group name
Storage type
Row status
(Optional) Displays information for a specific SNMP group.
(Optional) Displays information about users within the specified group.
(Optional) Displays information about groups assigned to a specific
security SNMP model.
(Optional) Displays SNMP group information for a specified storage type.
= SNMPv1
= public
= Anyone
= nonVolatile
= active
= SNMPv1
= public.router1
= Anyone
= nonVolatile
= active
show snmp group
SecureStack C2 Configuration Guide 8-11