Set Port Lacp - Enterasys SecureStack C2 C2G170-24 Configuration Manual

set port lacp

Port Instance:
ActorPort:
ActorSystemPriority:
ActorPortPriority:
ActorAdminKey:
ActorOperKey:
ActorAdminState:
ActorOperState:
ActorSystemID:
SelectedAggID:
AttachedAggID:
MuxState:
DebugRxState:
This example shows how to display summarized LACP status information for port ge.1.12:
C2(su)->show port lacp port
Port
ge.
1.12
This example shows how to display LACP counters for port ge.1.12:
C2(su)->show port lacp port
Port Instance:
LACPDUsRx:
LACPDUsTx:
IllegalRx:
UnknownRx:
MarkerPDUsRx:
MarkerPDUsTx:
MarkerResponsePDUsRx:
MarkerResponsePDUsTx:
set port lacp
Use this command to set link aggregation parameters for one or more ports. These settings will
determine the specified underlying physical ports' ability to join a LAG, and their administrative
state once aggregated.
Syntax
set port lacp port port-string {[aadminkey aadminkey] [aadminstate {lacpactive |
lacptimeout | lacpagg | lacpsync | lacpcollect | lacpdist | lacpdef | lacpexpire}]
[aportpri aportpri] [asyspri asyspri] [enable | [disable] [padminkey padminkey]
[padminport padminport] [padminportpri padminportpri] [padminstate {lacpactive |
lacptimeout | lacpagg | lacpsync | lacpcollect | lacpdist | lacpdef | lacpexpire}]
[padminsysid padminsysid] [padminsyspri padminsyspri]
Parameters
port port‐string
aadminkey
aadminkey
7-48 Port Configuration
-----GlA
-F----lA
00-e0-63-9d-b5-87
Detached
port Disabled
Aggr Actor System
Pri: System ID:
[
none (32768,00e0639db587,32768),(32768,000000000000, 1411)
Specifies the physical port(s) on which to configure LACP. For a detailed
description of possible port‐string values, refer to "Port String Syntax Used
in the CLI" on page 7‐2.
Sets the port's actor admin key. LACP will use this value to form an oper
key and will determine which underlying physical ports are capable of
aggregating by comparing oper keys. Aggregator ports allow only
underlying ports with oper keys matching theirs to join their LAG. Valid
values are 1 ‐ 65535. The default key value is 32768.
ge.
1.12
1411 PartnerAdminPort:
32768 PartnerOperPort:
32768 PartnerAdminSystemPriority:
32768 PartnerOperSystemPriority:
32768 PartnerAdminPortPriority:
PartnerOperPortPriority:
PartnerAdminKey:
PartnerOperKey:
none PartnerAdminState:
none PartnerOperState:
PartnerAdminSystemID:
PartnerOperSystemID:
ge.
1.12 status summary
Partner System
Key: Pri: System ID:
ge.
1.12 counters
ge.
1.12
11067
0
0
0
0
0
0
374
1411
1411
32768
32768
32768
32768
1411
1411
--DCSGlp
--DC-Glp
00-00-00-00-00-00
00-00-00-00-00-00
Key:
]