Show Ip Pimsm Staticrp - Enterasys SecureStack C2 C2G170-24 Configuration Manual

show ip pimsm staticrp

Parameters
group‐address
Defaults
None.
Mode
Any router mode.
Example
This example shows how to display RP that will be selected for group address 224.0.0.0:
C2(su)->router> show ip pimsm rphash 224.0.0.0
192.168.129.223
show ip pimsm staticrp
Display the PIM‐SM static Rendezvous Point information.
Syntax
show ip pimsm staticrp
Parameters
None.
Mode
Any router mode.
Defaults
None.
Example
This example shows how to display PIM information.
C2(su)->router# show ip pimsm staticrp
Address
--------------- --------------- ---------------
123.231.111.121 234.0.0.0
192.168.129.223 224.0.0.0
Table 20‐13 provides an explanation of the command output.
20-58 IPv4 Routing Protocol Configuration
The Group Address for the RP.
STATIC RP TABLE
Group Address
255.0.0.0
240.0.0.0
Group Mask